AK47 Ambidextrous Safety Ambi AK-47
The operator series AK47 ambidextrous thumb safety has given the ak47 the ergonomics of the AR15 making it a much more user friendly platform. Our AMBI left side safety is an alternative to the Galil safety but is much easier to install than a Galil safety.
The operator series AMBI safety is made of pre heat treated 4130 steel and can be easily installed with a 3/8 drill and a file. This is not a drop in part due to the numerous variants and manufacturers of the AK-47. The pivot assembly has been made slightly tight and fitting will be required. Gunsmith installation is recommended however installation can be accomplished by the average person using a drill and a file. We have made our left side AK 47 safety to be hand fitted so you will get a nice safety without excess play.
This safety is designed for the most common 1mm thick receivers with standard trunnions. The safety can be altered to work with some other trunnions such as AMD-65 and similar. It will not work with underfolders and receivers with side scope mounts. We are currently working on a safety for 1.5/1.6 mm receivers.
Full instructions for easy installation are included with the purchase of your AK-47 Ambidextrous Safety kit.
NOTE: INSTALLING THIS PART REQUIRES ALTERING YOUR RECEIVER BY DRILLING THE ORIGINAL SAFETY PIVOT HOLE LARGER. THIS WILL BE A PERMANENT MODIFICATION. BE SURE YOU ARE AWARE OF THIS BEFORE INSTALLING.
WARNING: Improperly installed or adjusted safety levers can cause accidental firearm discharge and could result in serious injury or death! If you are not comfortable or sure how to remove or install the safety lever you should have a qualified gunsmith perform this for you.
Disclaimer: By purchasing the Operator series Ak47 Ambidextrous safety, you agree to release Sniperhandle.com and its agents from any and all liability incurred by using and installing The Sniperhandle.com Ambidextrous safety. The Ambidextrous safety is meant to enhance the original safety (not replace it). All users (you) of these products assume total and all risks, responsibility, and liability for the installation and use of these products. No warranty is offered, expressed, or implied for anything other than the material and workmanship of these products. If our part is defective it will be replaced, please see our return policy.