|
VLTOR EMOD Enhanced Modstock MilSpec AEB-M AR15 AR-15
The EMOD is based on the same rugged and practical design as the original Vltor Modstock - with specific features designed from lessons taken from the modern battlefield. The EMOD is about one inch longer than the original Modstock and with the rubber butt plate installed, it is about a quarter of an inch longer than the CRANE SCB. The increased length of the EMOD is a major benefit when used on scoped rifles (SPR/DMR), as it increases the available comb for any given length of pull. The buttplate of the EMOD is slightly wider and longer at the toe than the regular M4 stock with a noticeable negative pitch, making transitions from the ready feel much more natural. The EMOD was given enough weight to help balance out the normally muzzle heavy feel associated with negative pitch buttstocks. The toe of the buttplate is rolled under; giving the EMOD a superior feel when the weapon is held in the "out of pocket" heads up hold. The buttplate is covered with a removable rubber buttpad that is molded over a metal strike plate. The shape of the buttplate and the rubber buttpad give a solid stock purchase in all situations. The EMOD features more storage in the removable, waterproof side compartments; the EMOD holds up to four CR123 or three AA batteries. There is also an additional weather proof compartment in the clubfoot area of the stock, this compartment can be accessed quickly and holds two AA batteries or other small parts. Constructed from the finest materials, the EMOD will stand up to the most rugged demands. This EMOD is designed for the mlitary standard 1.14" Diameter "MILSPEC" size tube (commonly STAG, S&W, and many others). Available colors include Black, Foliage Green and Flat Dark Earth (tan). The EMOD is only available in the Clubfoot model. Available as Stock Only or as a Kit "AEBK-MB" (also includes buffer, chrome silicon spring, 5 position VLTOR Milspec tube, locking plate and castle nut).
EMOD at a glance | | | Style | Clubfoot with Butterfly Latch | | Colors | Black AEB-MB, FDE Tan AEB-MT, Foliage Green AEB-MG
| | Receiver Extension Tube Type | Available for MilSpec 1.14" | | Length w/buttpad | 7.75 inches (at centerline of tube) | | Weight | 14oz | | LOP fully collapsed | 11.5 inches | | LOP fully extended | 14.75 inches | | Buttpad angle | -5 degrees with decrease to -15 at toe. | | Sling Attachments | Standard military and Quick Disconnect Swivel Socket accessible from both sides. | | Storage | Total of 8ea CR123, or 6ea AA batteries in storage tubes. Additional storage for 2ea AA batteries or small parts in quick access compartment. |
| Available Options: |
| Kit Type: |
|
|
